GÜDE TK 2500 Table circular saw

The power of the 55187 TK 2500 table circular saw is 2200 watt motor power. With the dimensions at the table height of 625 x 582 x 865 mm in the normal state and pulled out LxBxH 625 x 690 x 865 mm larger parts can also be sawn without effort. The maximum cutting height at 90 degrees is about 74 mm at 45 degrees about 63 mm. The saw blade is 250 mm in diameter and has 36 teeth. The buildup dimensions are LxWxH: 900 x 690 x 1035 mm and the weight is 22 kg. As far as the specifications of the manufacturer, the 55187 TK 2500 table circular saw with a Schukostecker for each socket is equipped. The manufacturer did not provide any information on the direct performance. But whether the 55187 TK 2500 table saw is really good value for money, it will test normal customers. This is because they use the table circular saw in different situations, which guarantees this an everyday test.  

Price-performance ratio

Here the opinions differ, because the one are with the 55187 TK 2500 table circular saw super satisfied. And some apparently had bad luck, since the engine was just broken after a few weeks. Of course these were only one or two testers, which is not often the case. On the other hand, they were more than satisfied, as was the performance. Above all, a tester is a carpenter and this was more than satisfied with the performance and of course with the price. Because here the 55187 TK 2500 table saw was really tested, because this customer has always to do with a similar machine. This customer was even very satisfied, with all customers here giving the full score. However, there were then nevertheless the one or the other point deduction, which then gave a total score of 3.3 of 5 points. Frequently, user errors were also present, with which the 55187 TK 2500 table saw did not provide the desired performance or the hoped-for result.  

Assembly very simple

This was also very beneficial, because the construction was really very easy to cope with. Some testers, the machine could unfortunately not yet try, but were with the optics and the construction already more than satisfied. The handling, on the other hand, had turned out to be a little habituation, but the attack was still criticized. This can not be determined, which is then a little caution. Of course, some testers had also attached that they are simply laymen. Here, the simple construction was also felt as very simple, with which the 55187 TK 2500 table circular saw full here. Above all the good sorting at the delivery in the cardboard was very highlighted. Thus the table saw at least in this area more than convincing, whereby also the price was always highlighted. However, an improvement proposal was made at the same time, because the scale for the stop is easily released. This could then be more appropriate, because this is now an important part.  

Mixed result

Thus, the 55187 TK 2500 table saw could achieve only a mixed result, with many not giving the full score. This is incomprehensible, as it was precisely the testers who were completely satisfied with the table saw. All in all, the majority was very satisfied, but there were some difficulties in measuring. The scale was initially difficult to handle, which then improved after some practice. With the result, on the other hand, all testers were satisfied again. The saw is sharp and can get many parts small. However, it was simply a pity that some of the 55187 TK 2500 table saw did not last long. These testers were then more than just disappointed, even if there was fast replacement.