Test report: Bosch PTS 10 table circular saw
It should be a new table saw. After carrying out a comparison and my choice has fallen on the Bosch PTS 10 table saw. The reasons for purchasing this model from Bosch were varied, as can be seen from this experience report.
Purchase decision for the Bosch PTS 10 table circular saw
High efficiency, as long as possible durability and, of course, the purchase price, were three factors which decisively influenced the purchase decision in favor of the Bosch PTS 10 table circular saw. The security of the table saw saw was also not insignificant. Correspondingly, the Bosch table circular saw convinced me through the extensive accessories. All in all, these were the reasons that led to the purchase of the Bosch table saw.
Technical details about the Bosch PTS 10 table saw
The technical details are not insignificant for a table circular saw, as already mentioned, this was a purchase basis for the Bosch table circular saw. The Bosch table circular saw achieves an output of 1,400 watts, with an idle speed of 5000 revolutions per minute. For the operation of the Bosch table saw a 230 volt connection is necessary. It is equipped with a saw blade of 254 x 30 mm. The Bosch PTS 10 table circular saw is equipped with a variety of setting options. Thus, the tilting angle of 0 to 45 degrees and the miter angle of minus 60 degrees to plus 60 degrees can be set for the table circular saw.
The cutting depth is up to 75 mm. The Bosch table circular saw weighs 32.5 kg. The dimensions of the table circular saw are 78 x 67 x 36 cm. The table circular saw from Bosch is supplied with extensive accessories. The accessories include an undercarriage, a saw blade, a floor plate, a table extension for the bench circular saw, a vacuum hose for the suction, an Allen key for adjustments, an auxiliary stop, an angle stop and a leaf guard. A further advantage of the Bosch table circular saw is a splitting wedge and a sliding block.
Solid installation from the Bosch PTS 10 table saw
Not unimportant in the case of the Bosch PTS 10 table circular saw is, of course, a safe stand. A safe stand not only ensures safe handling of the table circular saw, but also considerably easier handling. The underframe at the table circular saw is easy to set up.
Handling the Bosch PTS 10 table saw
The handling of the Bosch table circular saw is very simple. This starts with the installation, for example with the undercarriage. The remaining accessories such as the suction hose for the Bosch circular saw can also be easily installed, but can also be removed. The handling of the Bosch table circular saw with regard to the installation is as simple as the handling with regard to the operation. Precisely as far as the adjustment possibilities with the saw blade are concerned, one can make these with simple hand grips. It is also easy to replace the saw blade with the Bosch circular saw.
Using the Allen key, you can easily change the tool at any time. One of the highlights of the Bosch PTS 10 table circular saw is its weight. Due to the weight of 32.5 kg one can transport the table circular saw relatively easily. This is a great advantage when you want to saw something else.
Not to be neglected is of course also the handling in the operation of the table circular saw, also I could not find any disadvantages.
Small disadvantage with the Bosch PTS 10 table circular saw
With all the advantages and positive experiences I have made with the Bosch table circular saw so far, I have also noticed a small disadvantage. This small drawback relates to the angle stop, which lacks a bit of accuracy. Especially if one would like to cut off very precisely with the Bosch PTS 10 table circular saw, you can always find smaller deviations, which are due to the missing accuracy of the angle stop.
The Test Result Bosch PTS 10 Table Circular Saw
The Bosch PTS 10 table circular saw is very solid. The Bosch PTS 10 table circular saw is equipped with a high-performance electric motor with a high speed. The comprehensive range of accessories is also worth highlighting at the Bosch table saw. This extends from the wedge to a suction hose. The handling of the Bosch table circular saw is very simple, precisely as regards the setting possibilities. In the use of the Bosch PTS 10 table circular saw, only one drawback could be made so far. This disadvantage relates to the accuracy of sawing, in this case, the manufacturer Bosch would have to carry out a subsequent improvement. Overall, I can recommend the Bosch PTS 10 table circular saw to anyone who is looking for a powerful table saw. My conclusion: a very good table saw.