Technical characteristics
| Capacity per m sq |
200 Watt / m ² |
| operating voltage |
230 V |
| fitting type |
wet construction |
| suitable underground |
in flexible adhesive, in Ausgleichmasse |
| appropriate flooring |
tiles |
| PTC |
one-sided connection |
| Mindestverlegetemperatur |
5 ° C |
| wet room suitable |
available |
| waterproof |
not available |
| zuschneidbares mesh |
available |
| feature |
high form stability and no slipping through heating sewed on |
Advantages
- very good workmanship
- with heating and good heating performance
- high reliability when the underfloor heating system
- mounting
disadvantages
for our apartment we wanted to install underfloor heating. When purchasing a floor heating, our choice on the AEG is set 200 TBS TC 30 fallen 2T underfloor heating. In the following review, you can find our experiences to the underfloor heating by AEG.
Buy the AEG TBS TC 30 set 200 2T underfloor heating
on a well processed underfloor heating we have put much emphasis at the time of purchase. Review of each model, we are TBS TC 30 on the AEG set 200 2T underfloor heating became aware. For this floor mainly two points on one very simple installation and connection spoke of AEG. There were of course other points, for example the heating performance. There was also a point, where the AEG could set 200 TBS TC 30 2T underfloor heating does not convince. This point applies to the purchase price, which is a bit high compared to the size of the single mat. Nevertheless we opted for this model of AEG, because the performance data have convinced us.
Technical data
processed sound the underfloor heating system is. Heating conductors are together securely sewn onto a fabric. The bottom at the base fabric is equipped with an adhesive, which is self-adhesive. The underfloor heating is per square metre on a heating capacity of around 200 watts. The overall is the underfloor heating in the single mat on a size of two premises. The width of the single mat is about 30 cm. The underfloor heating system is connected via a 230 Volt connection. For the port, still a concealed socket belongs to the extent. The distance between the electric is only 5 cm. With the carry trade and the electric, this comes with the underfloor heating to a depth of 3 mm. The heating cable are equipped with temperature sensors which are connected with a floor temperature controller. The underfloor heating is a low weight of only 1.9 kg, with dimensions of 44.8 x 30.8 x 20.4 cm. The AEG TBS TC 30 set 200 2T underfloor heating comes on for around 10 years. Delivery accessories at the AEG underfloor heating include two signs of types of and instructions for Assembly and use.
Security
at the AEG TBS TC 30 set 200 2T underfloor heating was also considered the security. So are the heating cable when the underfloor heating with FEP insulation. This does not provide security for the electric, but also protects them. There is also a copper braid, which also provides the necessary security to the heating cable. Overall, the underfloor heating meets the protection degree of IPX 7. It can be used, the underfloor heating by AEG in damp rooms such as a toilet and a bathroom.
Laying and handling
the relocation of the AEG TBS TC 30 set 200 2T underfloor heating is associated with no effort. So, you can install the floor heating system directly on the floor. To do this, you must remove only the foil of the adhesive and can then connect the underfloor heating with the underground. Then you can apply the flooring, for example tiles directly. The connection with any difficulty is connected by the connection with 230 Volt. The underfloor heating performance is very good. Here especially one pays, the very low Abstan when the underfloor heating: (d) between the electric. This one has the advantage, the floor heats up much faster.
Conclusion
The heating wire are mounted on a support trade, strictly speaking, these are sewn on. The media industry with a self-adhesive surface is equipped for easy installation. The floor heating of AEG comes per square meter on a heat output of 200 watts. The underfloor heating is a single mat, which comes to a size of two premises. The connection at the AEG TBS TC 30 set 200 2T underfloor heating is carried out via a 230 Volt connection. This includes also a concealed socket. The distance is only 5 cm between the electric sewn-on. Thus obtained a very good result in the heater. The floor warms up very quickly by the small distance. The overall is the single mat on a construction height of just 3 mm. The heating cable when the underfloor heating are equipped with temperature sensors. Also, even a temperature regulator belongs to the underfloor heating. Underfloor heating can be easily set by processing. A warranty of 10 years by the manufacturer AEG. Small drawback to the underfloor heating system is certainly the purchase price, which is a bit high. Through their performance, we are TBS TC 30 with AEG set 200 2T underfloor heating satisfied and can recommend it also.
