Technical characteristics
| Performance per m ² |
150 Watt / m ² |
| operating voltage |
230 V |
| fitting type |
wet, thin bed system |
| suitable underground |
in flexible adhesive, in Ausgleichmasse |
| appropriate flooring |
laminate, parquet, tiles |
| PTC |
bilateral connection |
| Mindestverlegetemperatur |
no information |
| wet room suitable |
available |
| waterproof |
not available |
| zuschneidbares mesh |
available |
| feature |
with adjustable thermostat, floor temperature sensor, fastening material and RCD |
Advantages
- good workmanship of the underfloor heating
- very good heating performance in the floor heating
- simple Assembly
- favourable purchase price
disadvantages
- fastening of individual mats
underfloor heating for our small apartment have we created us. After a long search and a comparison of offers, we opted for underfloor heating manufacturer Devi. Below, you will find why it was these heated floors and what experiences we have had, in this report.
That said touch floor heating for the Devi thin bedded
for the Devi thin bed touch underfloor heating numerous points have spoken. A us very low building impressed with this model and the manufacturer of Devi. If you would not lay the underfloor heating or can, this is an advantage straight. Also easy spoke for this floor supposedly mounting their performance in the heat and the. Not to neglect the purchase price when buying the underfloor heating. But even at this point the Devi thin bed could convince underfloor heating fully touch.
Technical data
heating conductors in the thin bed Devi are mounted on tissue heating touch. The underfloor heating is 150 watts on square metre. The power supply is 300 Watts. The operation of the underfloor heating requires a 230 Volt connection. The single mat with a connecting cable is equipped for the connection. The load of the heating element comes on 11 watt on the meter. The electric are also temperature sensor. The overall is the floor heating system on an area of two square meters. In the rolled up comes the underfloor heating to a size of 22 x 22 x 59 cm.
energy consumption
as mentioned in the technical details, the Devi thin bed touch underfloor heating to 150 watts per square meter. As a result of the low consumption of the underfloor heating, this meets the requirements of the energy class A. The floor heating of Devi in operation is accordingly.
Assembly and handling
the installation of Devi thin bed touch underfloor heating is well out of hand. You must use only the underfloor heating to the desired location and then roll out. More pay not attention in terms of laying out and installation of underfloor heating systems. The single mat for the floor-heating system are fastened by means of small black nails. These are simply beaten into the ground, but this is not entirely unproblematic depending on surface. For this reason the Assembly can be somewhat complex here and consequently disadvantage. With regard to the connection, the connection cable by advantage is here. The underfloor heating system defi works very well, very quickly the soil is warming up pleasantly warm. Equipped with temperature sensor, the underfloor heating works accordingly sparingly.
Conclusion
On an output of 150 watts on the square, the Devi thin bed comes touch underfloor heating. The underfloor heating system consists of a fabric that serves as a carrier. The heating cable are tightly connected with the carrier. The single mat of underfloor heating can be laid on the floor or as a supplement. The heating element come on 11 watt on the meter. Overall, the power supply is 300 Watts. The connection for the underfloor heating system via a 230 Volt connection. This type of regulation n a connection has a great advantage when the underfloor heating of Devi. So this facilitates Assembly considerably. Where in general the installation of underfloor heating has no great difficulty. Due to the shape as a role, can be simply roll out the underfloor heating. Small difficulties can arise when the underfloor heating with the attachment. So here is attached using small nails. While this may be a problem depending on the nature of the subsurface,. Overall, the single mat at the Devi is underfloor heating on an area of two square meters. Not to neglect the energy consumption are of course for the underfloor heating. Here you have an advantage again, so the energy is correspondingly low. So the underfloor heating system meets the requirements of the energy class A. Up on the deficient during Assembly, we are very satisfied with the Devi thin bed touch underfloor heating. You warming up very quickly in use. We can recommend the underfloor heating, our test conclusion note 2.
