Technical characteristics
| Performance per m sq |
160 Watt / m ² |
| operating voltage |
230 V |
| fitting type |
wet building |
| appropriate ground |
on insulation boards, screed, in flexible adhesive, in Ausgleichmasse |
| appropriate flooring |
laminate, parquet, tiles |
| PTC |
one-sided connection |
| Mindestverlegetemperatur |
5 ° C |
| wet room suitable |
available |
| waterproof |
available |
| zuschneidbares mesh |
available |
| feature |
with an adjustable thermostat and limit sensor |
Advantages
- very good processing
- low installation height, in radiant heating
- good heat output
- very easy mounting
disadvantages
- must be dry and dust free
floor heating I wanted to install in my apartment. Because this should be as inexpensive, my choice on the AEG TBS TB50 has fallen underfloor heating. The experience with this floor heating by AEG following a review.
Purchase reasons for AEG TBS TB50 underfloor heating
as mentioned previously, the price was very important to me when buying a floor heating. Of course, the performance had to agree. Basically TB50 liked on individual models, the AEG TBS underfloor heating. In addition to the price and performance, has me especially when the underfloor heating, that it has only a low installation height. Also its very simple at this floor heating installation I liked. Ultimately this purchase reasons have resulted in underfloor heating TBS TB50 sale of AEG.
Technical data to the AEG TBS TB50 underfloor heating
to a single mat is TBS TB50 AEG underfloor heating. The mat when the underfloor heating is a textile and plastic fiber blend. The heating cable is firmly connected with the single mat. You are provided with an external sheath insulation PVC. There is a self-adhesive surface on the bottom at the single mat. The distance between the electric on a single mat is approximately 63 mm. The overall is the single mat when the underfloor heating to a depth of 3 mm. The connected load is 800 watts. The overall is the single mat on a square meter surface of about 5 m². You here has a width of approximately 50 cm and comes to a length in the unrolled on 10 m. The heating power per square meter is at the AEG TBS TB50 underfloor heating 160 watts. The overall is the single mat rolled up to dimensions of 51 x 21 x 20,8 cm, weighing 3.2 kg. The single mat for the underfloor heating system is supplied with a manual. By the manufacturer, a warranty is given on the heating mats by 10 years.
Suitability of AEG TBS TB50 underfloor heating
not to neglect at the AEG TBS TB50 underfloor heating was of course their suitability. Here are two advantages to name a few, for one, you can use it as a full system, but complement existing under-floor. Also, it is very good that they can be used both in a low-energy, but also in a passive house. Due to the assurance of the heating cable can be used, the individual mats when the underfloor heating by AEG in wet rooms such as a bathroom, for example.
Handling of the AEG TBS TB50 underfloor heating
at the beginning I had at the AEG TBS TB50 underfloor heating well my concerns, especially with regard to the laying and connecting. Here confident but you can lay them easily the underfloor heating, through the single mat as a role. Also, you need any screws for mounting the single mat with the ground. Instead, it needs consider just the protective foil on the bottom off. Where you have to watch so that you have a good grip when the underfloor heating, the floor before laying, must be dust-free and dry. This is not the case, namely the single mat can detach again. This is certainly a small flaw, a disadvantage when the underfloor heating by AEG. After installation, the connection is not a big problem. The heating power of the underfloor heating system is very good, you warm them t on the floor relatively quickly. The response time is therefore short.
Conclusion
The AEG TBS TB50 underfloor heating is dealing with a single mat. The single mat is at the surface of a textile and plastic fiber mixture. The heating cable is fixed on the single mat. The heating cable are provided with an external sheath insulation PVC, this also serves as protection for the heating cable. The base is equipped with a self-adhesive surface. 63 mm distance between the electric at the single mat. The heating element, but also the base material is not very high. So comes the single mat when the underfloor heating to a depth of only 3 mm. It comes when the connected load to 800 watts. The size of a single mat is about 5 square meters. You here has a width of 50 cm and comes to 10 m length. The heating power that is emitted from the single mat is around 160 watts per square meter. The overall is the single mat dimensions of 51 x 21 x 20.8 cm in the rolled up and weighing 3.2 kg. The manufacturer grants a warranty of 10 years and comes with a user manual. You can install these in terms of the handling of the underfloor heating, simply. Here the self-adhesive surface pays for itself. But you must make sure here that a transfer is possible only when the soil is dry and free of dust. The response time for the heating performance is very good. Overall I am TBS TB50 underfloor heating with AEG very satisfied.
