Clear water must often be transported from shafts, wells or reservoirs. In order to be able to pump water reliably from large depths, an extremely powerful device is necessary. For this reason the Einhell BG DW 1300 N well pump was once more closely examined in the course of a detailed test. 

High quality materials and easy to read displays

The pump housing of the Einhell BG DW 1300 N well pump is made of high-quality stainless steel, a rustproof and robust material. The pressure connection has a stable brass insert and convinces thanks to the integrated non-return valve. The on / off switch is easy to reach and allows the Einhell BG DW 1300 N well pump to be switched on and off without much effort. The clearly visible operating display is also practical. In the test it was always possible to have a good view of whether the pump is in operation or not. Also the network display is very good to read. All in all, the Einhell BG DW 1300 N wellpump convinced by the appearance and the high-quality materials.  

Risk-free use thanks to overload switch

A big advantage of the Einhell BG DW 1300 N well pump is the overload switch. If the motor overheats once, the unit will automatically switch off. Damage is effectively prevented, and after cooling, the device can be set up again without problems. In this way, the longevity of the Einhell BG DW 1300 N well pump is guaranteed. Users do not need to worry that the sensitive motor is overloaded.  

Important facts about the Einhell BG DW 1300 N well pump

A total of 20 meters of drainage rope is available. This is long enough to drain the Einhell BG DW 1300 N well pump into very deep wells. In the test a well with 15 meters depth served as an experiment. The pump was easy to abseil thanks to the long drainage and could be carried up again in the same simple way. The engine operates with a strong 1,300 watts. Thus the well pump, despite its light weight and the compact design, is capable of carrying up to 5000 liters per hour. The discharge height itself is 65 meters, the depth of immersion is a maximum of 20 meters.  

Only connected in very clear water

It is important to note that the pump is only able to transport clear water. Foreign particles such as sand or stones add to the pump. The Einhell BG DW 1300 N well pump has a stainless steel dirt sieve - but this only works to a certain degree of soiling. Against small and larger stones it is powerless. For this reason care should be taken to ensure that the water to be pumped is quite clear to guarantee a long service life.  

Observe the maximum water temperature

The maximum water temperature at which the Einhell BG DW 1300 N well pump should operate is 35 ° C. It is therefore important to ensure that the well or pond is sufficiently deep or not directly exposed to the sun. Ideally, the water is observed for a prolonged period before its purchase. Thus, buyers can be sure that the pump does not take any damage. However, ponds and wells whose temperature rises above 35 ° C are rather rare.  

Compact design and flexible application locations

The connection cable is 22 meters long and has been very convincing in the test. However, the very compact design is particularly positive. The Einhell BG DW 1300 N well pump has a diameter of just 102 mm. It is suitable for every KG-DN DN 100. It can be used in a wide range of applications and works reliably and efficiently even in a small space. The Einhell BG DW 1300 N well pump is also ideally suited for narrow wells.