Honeywell HT 112E Table fan
| THE TEST RESULT | |
|---|---|
| design |   |
| service | |
| Handling & comfort | |
| Noise level | |
Test report: Honeywell HT 112E Tischventilator
So that it is not so warm in the living room, we have bought a table fan. Our choice has been made with a model from Honeywell, more specifically the Honeywell HT 112E table fan. Why we chose this table fan can be seen in this review.
Purchase decision for the Honeywell HT 112E table fan
There have been some points for the Honeywell HT 112E table fan. We were attentive to this table fan mainly because of its very cheap purchase price. This purchase price convinced us in comparison. But he was also able to convince the performance data, for example in the air throughput in an hour and the different power levels. We also enjoyed the dimensions of the table fan and the low weight. These reasons led to the purchase of the Honeywell HT 112E table fan.Technical data about the table fan
Among other things, the table fan is made of plastic. The wings at the table fan come to a diameter of 30 cm. To protect the wings of the table fan, they are protected by a protective grille. It is operated via a 230 volt connection, for this purpose the table fan is also equipped with a connection cable. The capacity of the table fan is up to 40 watts. Its performance allows it to convert up to 950 m³ of air per hour. Its performance can be adjusted in three stages. The swivel range of the air in the table fan can be set as required. The table fan is mounted over a wide base. In operation it comes to a noise level of up to 63 dB. The table fan has a carry handle for installation and transport. It comes in dimensions of 26 x 35.5 x 48 cm, weighing 2.4 kg and is held in a black / silver design.service
The operation of the Honeywell HT 112E table fan is not a trick, with the head on the back there is a knob for adjusting the power and for switching on and off. Also located there is the pin for the adjustment of the pivot range. The settings can be changed at any time without any effort. Due to its wide base, the Honeywell HT 112E table ventilator is very safe, and the long connection cable is not very restricted at the installation site. For protection in operation, the table fan has a grid. This can be removed at any time, so that the leaf blades are cleaned well for cleaning.Lack of the Honeywell HT 112E table fan
In the Honeywell HT 112E table fan, we found a deficiency, namely its noise level. In operation and depending on the power level that is set on the table fan, a clear noise level and sometimes vibrations can be detected. This can interfere with a permanent use of the table fan.Conclusion
The Honeywell HT 112E table fan is made of solid and solid plastic. It comes at a power of 40 watts, it requires a voltage of 230 volts. A correspondingly long connecting cable for the table fan ensures sufficient freedom of movement during installation. The air throughput in the hour is up to 950 m³. In three stages you can adjust the power simply by turning the knob and change it at any time.
Due to its design with a carry handle and due to its weight of only 2.4 kg, one can handle the table fan well and also set up. The operation of the table fan is very easy. This also applies to the cleaning of this, so the protective grille can easily be removed if necessary. In addition to numerous points where the Honeywell HT 112E table fan could convince us, we had to notice a disadvantage in the use.
Unfortunately, Honeywell's table fan is not very quiet, depending on the substrate and performance level. Not only does a noticeable noise level, but also a vibration. This can be very disturbing with the table fan. Our test result falls to this one disadvantage but very good. The performance informs about the air throughput and also the purchase price. Overall, we are very pleased with the Honeywell HT 112E table fan.