An electric fireplace in a corresponding design should be. Ultimately, my choice has fallen on the Klonstein Chamonix retro fireplace. Why it is calculated this model of an electric fireplace, you can learn later in this experience report.  

That is why I decided to use the Klonstein Chamonix retro electric fireplace

Since an electric fireplace is not quite as favorable, the processing and the quality associated with it was very important. Also, the electric fireplace should be equipped with a good heating capacity, preferably with different heat settings. Also, the electric fireplace should not be so difficult and of course the assembly should be very simple. Before I have opted for the claron Chamonix retro electric fireplace, I have different models compared. Ultimately, I decided to use the Klonstein Chamonix retro electric fireplace. The decisive factor was the purchase decision of the electric fireplace, on the one hand the high heating capacity, the adjustment possibility with the heating power, the weight and the design, but also the price. How good the ultramodern Chamonix retro-electric fireplace is, of course this had to be shown by practice. But I can anticipate the experience report, which convinced me the electro fireplace.  

Technical information about the electric fireplace

The elec- trical heating system for the electric fireplace has two heat settings, one of which is 1000 watts and 2000 watts. The electric heating system for the Klonstein Chamonix retro-electric fireplace is operated by a built-in switch unit. The electric heating is framed by a wooden conversion so that it looks like a fully-fledged fireplace. This includes, of course, a flame simulation which can be switched to this. In addition, a blower can be connected.The dimensions of the electric fireplace are 109 x 102 x 35 cm, with a weight of 45 kg. The wooden chimney is painted in a completely white design. As an accessory to the Klonstein Chamonix retro-electric fireplace, a German-language manual is included.  

Operation and handling of the electric fireplace

Of course, in the context of the electro-fireplace, the question always arises. However the operation of the electric fireplace is very simple. The heaters can be switched on and off without great effort, the same applies to the fan in the electric fireplace. After several months in the company, I can say that the heating power of the Klonstein Chamonix retro electric fireplace is very good. In operation between the individual heating stages, the electric fireplace is very quiet.Unfortunately, this is not always true, it looks different when the blower is running, but later on. Of course, care is also a part of the operation and handling of the electric fireplace. Here I had my concerns with painted wood. But these concerns are unfounded in the electric fireplace. The varnish of the Klonstein Chamonix retro-electric fireplace is very robust and, above all, largely shock-resistant. Also, the surface is very smooth and can be cleaned accordingly. Overall, the maintenance of the electric fireplace is very simple.  

Very simple assembly

Of course, when I bought the electric fireplace, I had my reservations about setting up and assembling. But these concerns are unfounded. Thus, the Klonstein Chamonix retro electric fireplace is supplied large parts assembled.The electric heating itself, you only have to plug into a socket. There is no direct electrical connection via wires. Also the dimensions of 109 x 102 x 35 cm and the weight 45 kg do not complicate assembly. Overall, the installation of the electric fireplace is possible within a short time. You do not have to obtain any permits during installation. Of course, you should pay attention to the appropriate support with regard to the weight of 45 kg and depending on the floor covering. This prevents damage to the floor covering. This is also the only thing you should consider when installing the Klonstein Chamonix retro-electric fireplace.  

Small deficiency in the clear stone Chamonix retro electric fireplace

As already mentioned, I have been using the electric fireplace for several months. During this time I also noticed a small shortage in the company. And this deficiency concerns the blower when one uses this. The blower is in operation but then clearly perceptible, in part, even a rattling. For this reason, we see the use of the blower in the electric fireplace to a large extent. What has not disturbed us, however, since the blower is not necessarily necessary for the operation of the electric fireplace. In this case, the manufacturer would have to correct and replace the blower.