Technical characteristics

Dimensions 60 x 60 x 4 cm
weight 13 kg
voltage 230 V
protection class IP 44
heating performance 600 Watt
material metal
overheat protection available
surge protection available
wall - and ceiling mount available
feature high energy efficiency through additional convection technology

Advantages

  • ready to use
  • easy to install
  • energy-saving
  • environmentally friendly
  • latest techniques processed

disadvantages

  • intense price
  • for only spaces to 12 square meters
  • very inaccurate marking at the thermostat
spaces such as bathrooms and lounges, which are not always used, it can happen that no heating is fitted with. In order to not waive a heat source, many consumers rely on infrared heating. The biggest advantage of these devices is that they are very energy efficient and environmentally conscious work. Has a permanent place on the market the Vasner Konvi 600 infrared heating back up. This is because the heating system consists of high-quality materials. In addition to ensure that all the details are put together perfectly. The special feature of this heater is that it is equipped with the most modern technology.

Easy Assembly -

consumers who have no technical skill, have installed the heating in a few minutes. This is because the heating system by means of two screws will be attached to the wall. So only the holes need to be drilled and the work is already done.

Scope of delivery – perfectly put together

consumers, allowing to send infrared heating will not be disappointed. Blame has the contents of the package. This means that consumers get heating, a German manual and two mounts for the wall except for the. This ensures that the Assembly immediately can begin.

Commissioning - a no-brainer

for infrared heating can unfold their full labour, the consumer must yield only the power plug to a suitable power source in connection. For this purpose a normal socket with 220 to 240 volts is perfectly sufficient. To start, press the thermostat knob. This is expressed by a twisting motion in the proper position.

technically a masterpiece

the technical equipment of the infrared heater is hard to beat. The main part of the heater is metal. A high-quality heating foil is applied on the metal body. This has the latest convection technology and the most advanced hybrid technology. Together these features result in a very energy-efficient and high heating performance. The maximum performance of this heating is 600 watts. This is sufficient for a 12-square-meter room. The integrated temperature control located on the side of the device and is adjustable in three stages. The surface temperature can be between 50 and 105 degrees Celsius. The radiation angle hits with 170-degree record. This means that each angle is optimally heated. The radiation range can be up to 3.5 m. With a very flat design, the heat is delivered faster. Furthermore the is fitted with ventilation slots. These are top of the radiator. As a result, the heat is evenly distributed.

Perfectly safe

infrared heating causes a short circuit, a Überspanungs - and overheating protection is integrated. In addition, the protection class IP 20 has been incorporated. Thus, it is not tragic, when the consumer forgets to turn the heat on zero.

Where is the infrared heater installed?

The infrared heater feels lifted at best, if the place has to offer at least the dimensions of 600 x 600 x 40 millimetres. In addition, a weight of 13 kg long term shouldn't be an issue. The neutral white colour and the timeless design excellent adapt the remaining facility. The only requirement is, a source of power should be nearby. The reason is, because the length e the cable is only 1.90 metres.

Conclusion

For the VASNER Konvi 600 infrared heating can be drawn only one conclusion, this is a buy recommendation. This is because the heater is a perfect additional heat source. In addition, the heating for everyday use is perfect. In addition, the consumer finds no signs of excessive wear. This makes the value can't be beat.