Technical characteristics
| Performance per m ² |
60 watts / m ² |
| operating voltage |
230 V |
| fitting type |
wet, thin bed system |
| suitable ground |
in Ausgleichmasse, in flexible adhesive, in screed |
| suitable flooring |
laminate, parquet, tiles |
| PTC |
one-sided connection |
| Mindestverlegetemperatur |
5 ° C |
| wet room suitable |
available |
| waterproof |
not available |
| zuschneidbares mesh |
not available |
| special feature |
with Verlegematerial, distributor rotor and mounting material |
Advantages
- quality
- low energy consumption
- very good value for money
- to recommend for installations in all rooms under a floor covering PVC, laminate, wood or tile.
- compatible with all water based (district heating, solar, oil and gas)
- switchable either on summer or winter operation
- can be easily even lay
- no full surface installation necessary
- is depending on the size of the room with one or two heating mats use
Disadvantages
most people looking for warm feet all year round in their living rooms. The ancient Romans knew that a heating system installed under the floor more efficiently heats spaces as a radiator is mounted to a wall. For consumers, in the transitional period, when the boiler is off, want to warm feet, offers the renowned brands of Sani Flex model 2systems underfloor heating to.
Underfloor heating '2systems' Sani Flex - electric and hot water heater in a
floor heating is equipped with two independent circuits (electric and hot water). The two heating circuits can be controlled independently of each other. A foot heat perceived by the testers as a pleasant settled with the electric surface heating on cool summer days in the test produce. In the winter, the hot water heater is used. In the test, the model Sani Flex '2systems' as economic and modern all-year floor heating works.
Installation of sanitary Flex'2systems underfloor heating
laying of underfloor heating systems turned to in the test as easy as pie. For the work to be done quickly, the heating cable and heating ear on the grid mat are pre-assembled. To lay the underfloor heating, it is only needed to roll out the mat fabric. Positive noticed in the test that the fabric mesh mat, if necessary, also easily around set can be around corners. The durable fabric mesh mats are designed so that they easily could be adapted in the test by cutting the geometry of the relevant area. Leg cut the mats must be sure only that this damage neither the heating nor the heating cable. The Distributor rotor are integrated in the wall, if no wall mounting is carried out. So that at any time, access to the Distributor rotor is possible, it has proved an inspection opening in the test practical. The fittings or connectors, the connection to the already existing in the household heating system, for example a boiler is that, must be placed by the customer. It must here be pointed out that these components not included with the underfloor heating including are and therefore separately. The cables attached to the heating mats for the electric underfloor heating of all mats be connected together on the thermostat of floor radiant heating Sani Flex'2systems.
Performances of sanitary Flex'2systems underfloor heating
the Sani Flex'2systems floor heating is for floors with sizes from 2, 5 m 2 up to 10 m² without controller available. In addition, the product as a practical complete set including temperature thermostat regulator and RTL offered rule box. Flex'2systems underfloor heating two become the automatic control of the temperature for the product of Sani Control offered. The consumer has the choice between models with the type designations 510 and 520. Model 510, the temperature is comfortable by a rotary knob, has proved to be a stable and long-lasting in the test. The model 520 is additionally equipped with a programmable, digital weekly timer, which automatically switch the underfloor heating and will turn off and the user provides additional comfort.
Technical data of the underfloor heating
- 3 meter long Elektrozuleitungsheizkabel - heating capacity approximately 120 W / m ² - performance at a temperature of 30 degrees Celsius: circa 60 W / m meters - maximum test pressure 12 bar - maximum operating pressure 6 bar - 90 degrees Celsius maximum temperature range - temperature: 10 to 60 degrees Celsius - heating pipe: impervious according to DIN 4726PB 8 x 1 mm – width of the mat: 80 cm - length of heating mats: roughly 4 metres, (2,5 m²) - heating after selection between 2, 5 m 2 up to 10 m²
conclusion
the product of Sani Flex'2systems underfloor heating can all be recommended, which like barefoot even in winter. In the test, the combined underfloor heating from the House of Sani Flex with a high-quality finish, an easy installation, a long service life, a fabulous value for money and a low power consumption has earned a buy recommendation.
