Cable drum with four sockets

The Masterplug Pro-XT cable drum has been designed for the ambitious DIY enthusiast who wants to have several electric devices, such as a drilling machine, saw, spotlight and more simultaneously connected and ready for use, during a residential renovation. This saves a lot of time, which would be necessary for the changeover of the individual power connections. However, the cable box is also suitable for smaller garages or garages with insufficiently installed power connections. The Masterplug Pro-XT cable drum has four Schukosteckdosen and an 8m connection cable. The length of the connection cable is absolutely sufficient for normal room sizes, workshops and garages. With a weight of just 1.3 kg, the device is easy to transport or change.  

Processing and safety

The safety cable drum impresses with the rugged design of break-resistant special plastic. The trendy colors of the cable box are conspicuous, so you can quickly find them, if you should be able to see some building site chaos. It is simply not to be overlooked, which is a safety aspect in a device through which electrical current flows. This also applies to the cable itself. The PVC cable is light green and is therefore good on dusty ground. This is an advantage when you have several cables around several devices, because this cable stands out well from the other cables and the ground. In addition to the on / off switch, there is a thermal protection switch, which protects the appliance from overheating. Due to the child safety at the switch, the cable drum does not pose a risk to the little ones.  

Handling the cable drum

The handling of the cable drum is conceivably uncomplicated. Simply connect the main connector to an available power source and plug the power connectors of the respective devices into the four connector sockets. And you can get started. An LED control light indicates the power supply, so that even without a device test knows that power is on the line. The cable drum requires no batteries and is largely maintenance-free. After prolonged use, you should only clean them and remove dust and small particles such as glass chips or chips. The cable can not be damaged and the cable guide remains free and easy to run.  

Rewind the cable

With the pull-out handle and the cable guide made of metal, the cable is easily rewound. After the work has been completed, the connection to the devices is disconnected and the main cable is simply re-rolled up. To do this, use the button, which is attached on the side and rotates with it the gray lower part of the drum. At the end, the plug disappears in the housing, which is very practical. All this proves to be very easy, which should be a pleasure for many craftsmen.

Further

- The cable type is H05VV-F 3G 1.5 and is 5mm thick. - The cable drum is for 230V / 16A and for max. 3500W power. - The unit has a 5 year warranty