Technical characteristics
| Mounting |
wall boiler |
| energy carrier |
natural gas E/H, natural gas, liquefied petroleum gas, natural gas L/LL |
| nominal heat output |
23.8 kW |
| height |
850 mm |
| width |
440 mm |
| depth |
360 mm |
| weight |
54 kg |
| standard efficiency |
109% |
| range |
for flats in |
| control on the boiler |
available |
| room thermostat |
available |
| feature |
with stainless steel premix burners and constantly regulated gas valve |
Advantages
- good workmanship of the gas heater
- simple settings and high performance
- small dimensions of the gas heating
- favourable purchase price
disadvantages
a most favourable, but also powerful gas heater for our apartment we have searched. Search for a long time, is our choice on the Junkers AEO 30 4 C 23 fallen gas heating. To do so following a review, in particular to our experiences.
Buying motivations for the Junkers AEO 30 4 C 23 gas heater
are as powerful and not too expensive, were ever two criteria in the selection of a new gas heating system. We ultimately decided on the Junkers AEO 30 4 C 23 decided to gas heating. For this gas heater has spoken in addition to these points, also the dimensions, ease of operation, but also the uses, safety devices and ultimately also the ease of use. An advantage with this model, we have seen also the low energy consumption, in particular what requirements of the energy class of the gas heater.
Technical data to the Junkers AEO 30 4 C 23 gas heater
AEO 30 Junkers is solid among other things made of sand cast, plastic and stainless steel 4 C 23 gas heating. Just the Interior of the gas heating is essentially made of stainless steel. It features a cover with holes. You can make appropriate measurements in air and flue gas connection through these openings. The performance is the gas heater to a maximum power up to 24 kW. Due to its adjustable performance, you can operate the gas heater in the so-called low temperature range. It is suitable for the operation of underfloor heating. Companies can the gas heating with natural gas only. Operation the gas heater requires a 230 volt power connection. Here she comes on a performance of 90 watts in operation. It is controlled via a display with text display. The performance she will at the nominal heat output at 40 degrees on 7.3 kW at nominal heat output heating on 23.1 kW, when hot water up to 29.7 kW. The flow temperature in the gas heating is up to 82 degrees, as well as at the outlet temperature 60 degrees. It is equipped with various safety devices, these include among other things an exhaust thermostat to 120 degrees. Overall, the safety requirements the standard EN 12828. In addition, she met yet the IP X4D. Energy consumption, the gas heaters meets the requirements of the energy class A. Energy consumption, is accordingly low which is ongoing operational cost advantage. The Junkers AEO 30 4 C 23 gas heater meets all the requirements of the 90/396/EEC and EN677 / EN483 and is therefore approved. Colour, the gas heater is kept with their cover in a completely white shade.
Dimensions and weight at the Junkers AEO 30 4 C 23 gas heater
at the installation and the Assembly the size of gas heating is of course not to be neglected. Here is make the Junkers AEO 30 4 C 23 gas heater small dimensions paid. So is the gas heater to a width of only 44 cm, at a height of 84 cm and a depth of 35 cm. It takes away this not very much space. It comes on a weight 54 kg. Thus the gas heater is accordingly difficult and depending on the Assembly, also of disadvantage.
Handling the Junkers AEO 30 4 C 23 gas heater
handling is at the Junkers AEO 30 4 C 23 gas heating paid for the operation. So this works automatically and you want to do changes in the Make adjustments, so this is possible via the control panel with the display. The display is also a real improvement not only in the set, but also when reading. By the surfaces in the gas heating, you can wipe good. With regard to the mounting of the Junkers AEO 30 4 C 23 gas heating, so here's a proposal, but also a disadvantage. The advantages are the dimensions, thus it takes away space. This is of advantage, if there is space available. Weight 54 kg, just when the Assembly is bad.
Conclusion
Materials AEO 30 is well processed from various Junkers 4 C 23 gas heating. It comes on a power up to 24 kW, with differences here. A performance of up to 29.7 kW is in the hot water. When the temperature comes the gas heater to 82 degrees for the flow temperature and 60 degrees at the outlet temperature. The gas heater is operated exclusively with natural gas. It requires a 230 volt for operation in addition to a gas connection, connection. You come here on a 90 watts of power. The gas heater meets all safety requirements. The operation is connected with no difficulties. A control panel with text display contributes essentially. With regard to the installation, the space-saving dimensions are a great advantage on gas heating. Only the weight is a disadvantage. With the Junkers AEO 30 4 C 23 gas heating are we satisfied, we have noticed no shortcomings in the operation. The gas heater can be recommended.
