Technical characteristics
| Blade length |
225 mm |
| Blade property |
without back, special gear |
| workable materials |
wood |
| length |
not specified |
| weight |
159 gram |
| ergonomic handle |
available |
| two-sided blade |
not available |
| special feature |
works on train |
Advantages
- internal toothed
- optics
- quality
- works on train
disadvantages
- without a saw table
- no grip with attack angle
after a new Japan saw I was looking for and found them also. It was so 4190000 Japan saw the cherries. The motivations for the purchase of this model and what practical experiences I have made with the Japanese saw, can be found in this review.
When purchasing a new Japan saw, several points were me very important
buying decision for the cherries Japanese saw
. To the handle when the Japanese saw should not be too long, the same applies also to the saw blade. In addition, the blade with a fine tooth should be provided. In connection with the handling, preferably lightweight me was very important. Japan saw all of these issues that were important to me, has fulfilled the cherries 4190000 very well. For this reason I decided for this model.
Data to the Japan saw
off wooden and metal produced is the cherries 4190000 Japanese saw. The handle when the Japanese saw is made of wood and fitted with a corresponding riffle. What is special about the grip is the length, so it's indeed a short handle. The blade is equipped with a blade length of 22.5 cm. The Japanese saw comes with the weight on 159 grams and dimensions of 43.8 x 8.4 x 2.2 cm.
teeth when the Japanese saw
as already described in the technical details, is manufactured from metal blade. The blade thickness at the cherry comes 4190000 Japan saw to 0.6 mm. The blade is equipped with 16 teeth, the distance between teeth is 1.75 mm. A fine average result could be obtained with the teeth. The width of the cut is when the Japanese saw this maximum 0.9 mm.
handling the Japanese saw cherry
that is handling the cherries 4190000 Japan saw a light. For one, the grip and the weight felt is here. The Japanese saw very well in the hand is one by the handle and its processing. This also applies if you have time wet hands. This is not to neglect just in terms of security during the sawing. Through the processing, you can achieve a very good cutting result without greater effort.
Care 4190000 Japan saw the cherries
care at Cherry 4190000 is Japanese saw like the handling also, easy. If times is something with the teeth, can be removed again this by hand or using a cloth.
Conclusion
Made of two materials, namely 4190000 Japan saw made of wood and metal is made the cherries. It is provided with 16 teeth and thus with a fine toothing. Through the teeth to get a cutting width of 0.9 mm.
The handle is made of wood and fitted with a riffle, that is just in the handling of benefit. It's a short handle. The teeth and the low weight, the handling is easy.
This also applies to the Japanese saw saw performance. I have not determine disadvantages and shortcomings Japan saw the use of cherries 4190000. My conclusion to the Japanese saw Cherry is very positive, I am satisfied and can recommend them.
