For every pool owner it is a dream in the own pool to lie. If this is also still nice warm, then the happiness is perfect. Pool heating is not provided in every pool and whirlpool, but can be retrofitted quite simply. We have a pool heater for you tested here. Our experience is shown in the following text. 

delivery

The heating of the Alfa 44530 pool heater is the same. This device is fully assembled and requires power to operate. No additional accessories are needed for the heating, which is simply installed in the existing water hoses and remains permanently there.  

Areas of application

The Alfa 44530 pool heater can be installed well in many different types of pools. It is important that the water is not only pure, but circulating. There must be a movement so that the warm water can mix optimally with the colder water. Thus, whirlpools and smaller outdoor and indoor facilities are well supplied with warm water. This is ideal for private accommodation as well as for hotels and wellness establishments.  

Mounting

The installation of the pool heating is simple. It is inserted into a feed pipe of circulation. It is important that the connection is well closed with the clamps as a pressure is created inside. Thus, no water can escape unimpeded, but a controlled delivery takes place. A mains connection should be nearby so the Alfa 44530 pool heater can be operated. A normal connection is enough, high current is not required. However, it should be a safety socket because it works with water.  

Control mode

The control mode of the device is a multi-hour operation. This is quite simple and reliable. The operation can also be easily controlled by means of a timer. The current is switched on and off by means of this clock. The pump then goes on and off. We have found that it is a very reliable and durable device. It can be fixed in a pool or used as a supplementary device.  

maintenance

For maintenance, the device must be removed from the circuit. Therefore, the maintenance is usually equated with winter storage. Here the clamps are released and the device is emptied. The maintenance should be done with water. Water is passed through the device, which is permeated with a decalcifier liquid. Thus, the attachments are quickly and easily removed and the device remains permanently ready for use. The heating does not need to be maintained, is also not visible from the outside.