Technical characteristics
| Maximum heating capacity |
2,000 watt |
| heat settings |
2000 Watt |
| number of heating stages |
continuous |
| operating voltage |
230 V |
| suitable for room size |
not specified |
| mounting |
wall mounting, stand-alone |
| thermostat |
available |
| Timer |
not available |
| antifreeze function |
not available |
| blower function |
not available |
| special |
splash-proof |
Advantages
- silent
- very quickly warm
- stand and wall mounting
disadvantages
for our hobby room we were looking for a powerful convector. At the time of purchase, our choice on the AEG fell convector WKL 2003 F. You can see this experience report why we decided for this model.
Purchase of the AEG WKL 2003 F convector
on a very good performance, a slim design, various mounting options and ultimately the new coil should have a good price. Our choice fell this convector WKL 2003 F on the AEG. Firstly, because this model has met all our expectations. Also has this model convinced us that he is covered, but also TÜV and GS-tested with numerous safety features.
Technical data to the AEG WKL 2003 F convector
AEG WKL 2003 F coil is made of metal and needed to operate a 230 Volt connection. He is equipped with a cord and a plug. The cable has a length of 1.5 m. He gets on a performance of up to 2000 watts. With a temperature regulator, you can set the temperature between 6 to 30 degrees infinitely, and depending on the need. The convector works very environmentally friendly because it draws cold air, heats it and then releases. He is equipped with a surge protector, but also mi a frost protection and a tips. For the installation the convector feet has. He is completely decorated in a white design convector. He comes to a size of 95 x 49.6 x 13.6 cm. colour he is held in a white shade. The convector is a weight 6.1 kg. He is supplied with an operating and assembly instructions. The convector is both as GS TÜV.
Operation of the AEG WKL 2003 F coil
both standing to the AEG WKL 2003 F convector operate as mount it on the wall. For this purpose, also a wall mount is included in the coil. It is very easy to install. It opts for wall-mounting, the convector, this takes away not much room. So you must comply with only a wall distance of 2.2 cm. The AEG WKL 2003 F convector stands by its flat design and the small distance to the wall installation, not particularly strong in the area.
Heating power of the AEG WKL 2003 F convector
as mentioned in the purchase reasons, we chose also the AEG WKL 2003 F decided, due to its heat output convector. So you can warm up a room with the coil up to 20 sqm. In a relatively short time, here the convector has met our expectations fully.
Handling and operation of the AEG WKL 2003 F convector
the operation of the AEG WKL 2003 F coil a very easy. You can set the heating capacity depending on the existing thermostat. The heat output is very good and the convector is quiet in operation. The coil is good to transport because of the low weight. Is it dirty, so can be cleaned well these if necessary due to the processing of metal.
Conclusion
AEG is very solidly built WKL 2003 F convector. He has been with a continuous heat output from 6 to 30 degrees. Its heating and power, you can quickly warm up a room of up to 20 square meters with the coil. He works here very quietly and safely. Make sure the numerous safety features, like for example an overvoltage and frost protection. Also, the coil due to a tip protector can not fall over. While you generally have the choice, it is possible the convection both free-standing and wall run goal. The convector with a wall bracket is equipped for this purpose. We are very pleased with the AEG WKL 2003 F coil and can recommend them.
