Technical characteristics
| Ironing properties |
stainless steel strap, hardened |
| material |
brass |
| dimensions |
50 x 17 x 76 mm |
| field of application |
household or travel |
| corrosion-protected |
available |
| double lock |
available |
| automatic locking |
available |
| special |
of the lock body consists of brass, the bracket made of hardened steel. Suitable for various hedges. |
Advantages
- very good workmanship made of brass
- with a high quality cylinder
- equipped with a corrosion protection
- easy handling by the padlock
disadvantages
- purchase price for the padlock
for a closet at work, I was looking for a new padlock. My choice fell on a model of ABUS here. It was specifically that ABUS 85 50 IB padlock. Following this, a test report to the padlock.
Purchase decision for the ABUS 85 50 IB padlock
with the purchase of a new padlock, several points were important me. A possible high security through the padlock. Also was important that the padlock in the free can be used. More points were still the purchase price, the size and weight. Up to a point, the ABUS 85 was able to convince 50 IB padlock in all respects. Only of the purchase price, I was not so excited, here the quality of the padlock ultimately has its price. By ABUS padlock has done almost all of my expectations, I decided for this model.
Technical data to the ABUS 85 50 IB padlock
that is very robust and resistant ABUS 85 50 IB padlock. So this is especially hardened steel, namely made of brass. As a result of the processing, the padlock is not only durable, but also resistant to corrosion. This can be supplied by ABUS padlock used also outdoors. The temple at the padlock comes on a bracket strength by about 8 mm. The temple is at the closure, equipped with mushroom head pins and a pen barrel. This leads to a double lock. Equipped with this lock, padlock met the level 7. This ABUS 85 50 IB padlock comes on a weight of 281 grams and dimensions of 14.4 x 7.4 x 3 cm.
included in the ABUS 85 50 IB padlock
a lock without a key of course makes no sense. Accordingly 85 is included to the ABUS 50 IB two padlock keys.
Handling of the ABUS 85 50 IB padlock
the handling of the ABUS 85 50 IB padlock is very easy. Taking it in the hand, you notice the very robust processing through steel at the padlock immediately. The opening and closing of the lock is very easy. This also applies if you use the padlock in the outdoor area, so the weather. Here you can see hardly changes the closing behavior. There is a small swab the key, this is a bit too small. This handling isn't quite as easy when you're wearing gloves for example. By the size of the Castle and thus available free space in the bracket, you can rotate the lock to open well. In terms of security you must not worry because the processing, but also because of the profile of the key. Here the manipulation protection pays for itself.
Conclusion
It is manufactured from hardened brass ABUS 85 50 IB padlock. The lock meets the requirements of level 7 in terms of security. So, it is equipped with a PIN cylinder and mushroom head pins. A double lock is through the bracket, what the security increases. The strength of bracket when the bracket is 8 mm. As a result of the cylinder that is installed in the padlock, the key is especially shaped. This is a manipulation protection at the padlock. The padlock with two keys will be delivered. In the Sch lüssel there is a very small disadvantage, they are a little small. Just open with gloves hard something here then. With the ABUS 85 50 IB padlock in terms of handling, generally just open and close can be. Here the large bracket pays off when opening and closing. This, you can also rotate the lock to open. A simple opening is also possible, if exposed to the padlock of the weather. This is possible because it is resistant to corrosion. The padlock is supplied with two keys. Overall, I'm with the ABUS 85 50 IB padlock very satisfied, even if the purchase price at the time of purchase has not convinced me. Based on my experience, I can only recommend the padlock.