Agora Tec A 4 well pump

 
Agora Tec A 4 well pump-0-large
THE TEST RESULT
capacity Star onStar onStar onStar onStar off
technology Star onStar onStar onStar onStar off
processing Star onStar onStar onStar offStar off

Test report: Agora Tec A 4 Brunnenpumpe

The Agora Tec AT 4 well pump is a deep-well pump with screw technology. The robust 4 inch high pressure pump is sand resistant and powerful. The maximum discharge height is 80 meters, the maximum pressure is 8 bar and the maximum delivery rate is 2800 l / h. The Agora Tec AT 4 well pump is suitable for very deep wells with a diameter of 100 millimeters. The pump offers brass parts and a high-quality stainless steel housing. The port on the print page is indicated with 1 inch IG.The deep-water pump is sand resistant and it is a screw pump. This pump operates according to the displacement principle. Opposite the pumps with the wheels there is the great advantage when it is used in sandy wells. The Agora Tec AT 4 is very durable thanks to the use of high-quality materials, robust construction and screw technology. The materials of the pump are brass and stainless steel. Especially the technical characteristics and the clean processing can immediately convince. The problems with the sandy wells can be solved and the product simply makes pleasure. It is important for the buyer to ensure that the conveyor group wears up depending on the sand load. In the case of the sand, the particle size and the quantity are important. The support group can, however, be exchanged without difficulty in the event of problems.  

The most important data from the well pump

At the pump, the rated power P2 is 500 watts and the voltage is 50 Hz / 230 V. The cable length is 15 meters and the total weight is 12 kilograms. There are two hanging eyes included and one screw. On the pressure side there is the connection 1 inch IG. The protection class of the pump is IP 68, the maximum discharge height is 80 meters, the maximum pressure is 8 bar and the maximum delivery rate is 2800 l / h. The mean value of the flow rate and the delivery head is 1200l / 60m. The diameter is 94.5 millimeters, the maximum dive depth is 15 meters and the maximum water temperature is 35 degrees. The scope of delivery includes the German manual, the motor protection switch box and, of course, the 500W burner pump.  

The most important information about the well pump

Often a good deep-water pump is being looked for, so that a house can be supplied or even a garden can be irrigated. At this point, the Agora Tec AT 4 well pump is ideally suited. Due to its pumping height, the pump can meet all requirements. The stainless steel case is especially high-quality and ensures the long durability. The pump can be used to transport the pump absolutely simply. The pump is also not a problem in the winter because it is possible that the pump is also installed in the maximum depth of 15 meters. The pump can always convince by its very good processing. In principle, no disadvantages are known with the pump. The advantages are that it is a powerful and good pump. Even in winter the pump can pump, the pumping power is high and the discharge height is great.

Conclusion

Conclusion guy The well pump is a screw pump which is sand resistant. The pump works according to the displacement principle and therefore there is the advantage that the pump can be used with sandy wells. The pump meets all requirements and there is a long shelf life. The processing of the pump is very good and the housing is absolutely high quality. Due to the maximum immersion depth, the pump can also be used without problems in the winter.